Blog Details

Use and Maintenance of French Fries Oil-Removing Machine

The french fries oil remove machine must be installed on a flat, solid ground; Before installation, please prepare drainage pipe, power supply, etc.The French fries oil removal machine moves to the predetermined position, puts the shockproof rubber cushion; The oil removal machine is fixed by fixing the bolt or pulling the blasting screw.Connect the power and wait for the test machine. The main part is the inner liner, the inner liner is surrounded by small holes, the chips to be removed are placed in the tank. The motor is driven by a belt to rotate the liner at high speed. So a lot of centrifugal force, water and oil is thrown through the holes in the inner bladder is dumped, collected after the unified discharge. In general, for moist food, dehydration machine work two minutes to achieve the drying effect is almost the same as the dryer work 20 minutes to achieve the same effect, but the dehydration machine can not thoroughly dry food.  Therefore, a way to save time and energy is to wet food first dehydration operation, remove water before drying operation.
oil removing machine

Use the french fries to remove the oil machine before please carry on the test machine, pay attention to the test machine safety, after the test machine is normal, shuts down the equipment; cut off the power supply 10 seconds later, can use the brake auxiliary shutdown, after the equipment completely stopped, will need to take off the oil the food evenly placed in the French fries to take off the oil machine The gall bladder four weeks, starts the oil machine to dehydrate; 2-3 minutes later, the outlet basically has no water outflow, cut off the power, shut off the oil machine, check whether the French fries to achieve the desired dryness, will remove the dry French fries out of the oil bin, clean the French fries oil removal machine, natural air-dry after doing a good job covering.
 
The Maintatenance of Automatic French Fries Deoiling Machine
Common problems and troubleshooting methods are: Oil removal machine can not start; Elimination Method: Please check the power supply is connected. The rotating direction of the oil removal machine is inconsistent with the identification arrows; elimination method: Swap any two power cords on position. The oil-removing machine rotates with a different sound; elimination method: Check the dehydration machine inside whether there is sundries, do not use when do cover work.  When the oil-removing machine rotates violently, the elimination method: the material leveling, then start the oil removal machine.
 
At the end of the french fries to clean the oil machine, to avoid the remaining materials inside the machine, moldy smelly, regular inspection belt tightness, add lubricating oil, when not in use, please first the French fries off the oil machine naturally air-dry, do a good job covering.

If you want to know more about our french fries deoiling machine,please contact with me!
 

Leave Message