How to Cut Potatoes into Chips?

The whole machine using high-quality stainless steel and aluminum alloy production, high strength, good corrosion resistance, long service life, in line with the food industry standards of use. This slicer can be used to cut a lot of vegetables and fruits, such as banana chips, potato chips, radish chips, cassava chips, orange chips, and other slices.


Potato Slicing Machine Instructions

★ Open the front door before work, and use the dial to check whether there is any impact on the tool. If there is, loosen the tightening bolt on the turntable, move the turntable slightly outward, and then tighten the tightening bolt; close the open load Switch, start the open button, check whether the cutter running direction is correct, observe counterclockwise rotation from the inlet port to be correct, otherwise adjust the power cord, wait for the cutter to run in the correct direction, no-load test run, no abnormalities in each part. 
 

★Operation: Try cutting before normal work, observe whether the specifications and requirements of the cut vegetables are the same. Otherwise, the height of the blade and the turntable should be adjusted (or replaced), and the normal work should be done after the adjustment. The thickness of the slice is determined by the gap between the blade and the turntable, and the size change is achieved by adjusting the blade.